![EXOL Excelfluid RR Metalworking Fluid (S110) - 205 Litres](http://chemodex.co.uk/cdn/shop/files/pum51vhfq5t.jpg?v=1716385766&width=1445)
Product Features
Made for both ferrous and non-ferrous materials, Excelfluid RR is a blue coloured semi synthetic biostable cutting and grinding fluid containing a relatively high emulsifier to oil ratio which creates a highly stable micro emulsion when mixed with water improving wetting characteristics and work-piece visibility. Boron biostable performance additives offer excellent resistance to bacterial proliferation and improved hard water compatibility. With used in sawing applications, this product has been proven to perform exceptionally on titanium, aluminium,aero aluminium alloys, stainless steel 304 and 316, inconcel 718 and 625.
Benefits:
- Cost effective.
- Good levels of surface finish.
- Permits higher cutting speeds.
- Low foaming.
- Chlorine free.
- NP ethoxylates free.
- Multi-functional.
- Excellent residual corrosion protection.
- Maintains machine cleanliness.
- Good levels of boundary lubrication.
- Excellent tamp oil rejection.
Appearance | Blue liquid |
Emulsion Type | Transparent |
Foaming Tendency 5% emulsion in 50ppm Water. |
|
Specific Gravity at 20°C | 0.995 typical |
pH @ 5% | 9.3 typical |
Refractometer Correction Factor | 1.8 |
IP 287 Corrosion Break Point, % | 2.5 |
IP 125 Corrosion at 2% | 0/0-0 |
Reichert Lubricity Characteristics at 10% dilution Noise Reduction (metres) | 35 1.255 |
Oil Content | 20% |
Materials and Performance:
Material types | Performance Rating |
Titanium | *** |
Aluminium | **** |
Aero aluminium alloys | **** |
High alloy/stainless steel | **** |
Cast Irons | ***** |
Ferrous Materials | **** |
Applications | Dilution |
Tapping | 8 – 10 % |
Milling | 5 – 7 % |
Turning | 5 – 7 % |
Reaming | 8 – 10 % |
Sawing | 5 – 7 % |
Drilling | 7 – 10 % |
Grinding | 4 – 6% |