Pin & Bush lubricant is a heavy duty grease designed for application where adhesion, shock loading and good corrosion protection is needed. Ideal for use on bucket pins and bushes of heavy earth moving equipment, crane slews, and also as an assembly and running compound. The graphite concentration within the grease will fill surfaces and distribute load evenly, preventing further wear and is therefore particularly suitable to extend the life worn components. 

Features:
High levels of lubricating solids keeps working surfaces apart and substantially extends component life. 
Being fully resistant to the wet, extends the life of the lubricant and protects components from corrosion.
Adhesion improvers provide increase lasting protection. 

Applications:
Pin & Bush Lubricant can be applied by hand, or using a standard grease gun. Due to the high lubricating solid content, Pin & Bush lubricant is not recommended for use on anti-friction bearings.

Typical Test Data:
Appearance Smooth Grease
Colour Grey/Black
NLGI Classification 2
Thickener Lithium Soap 
Base Oil Blend Mineral Oils
Worked penetration 265 to 295
Dropping Point (°C) 185 min
Oil Seperation (%) 5 max
Copper Corrosion Pass
Resistance to corrosion Emcor (a) 0:0
Water washout @ 39°C % 3
Four Ball Weld Load (kgs) 700
Operating Temperature Range -20°C to +140°C
Solids % 16